Alina Sewing and Design

Chi-Town Chinos: High-Rise Wide-Leg Crop Pant Hack (Part 2)

Chi-Town Chinos: High-Rise Wide-Leg Crop Pant Hack (Part 2)

If you haven’t read part 1, read it here!

I’m back for part 2 to show you my FINAL adjustments for this Chi-Town Chinos high-rise, wide-leg crop pant hack.

I made all of the adjustments I said I would make in part 1, and it worked! As a reminder/recap, this is a 1.5″ rise increase and back pockets are printed at 110% (with 1/2″ added along the top edge of the angled pocket, which is included in the original pattern). That’s it! The only adjustments to the pattern from part 1! (All instructions, crotch curve info, how to widen the legs, etc. are in part 1, so go there for full help.)

As expected, I didn’t have to make any changes at all to the side seams with this pair because I used a rigid denim. (Reminder: my previous pair used a stretch fabric and I had to make some adjustments to the side seams.)

These pants were a bit wrinkly by the time I captured my husband this weekend to take photos, so don’t mistake the wrinkles for ill-fitting pants, please. 😉 You gotta take what you can get when you have three small kids, baseball practices, house projects, residency, homeschooling, church community, and just general life busyness!

I’m super happy with the fit and feel of these pants. They are SO COMFORTABLE. Now, I feel like I truly understand the wide leg pant trend. Seriously comfort + style = yes.

And do you remember my original inspiration from Everlane? I feel like I nailed it! (I made my legs slightly more narrow than the inspiration out of personal preference, but this is a pattern hack–you can make yours as wide as you want!)

Let’s talk about the fabric for a minute. I dyed this fabric myself! This was white denim from Blackbird Fabrics (purchased back in November and no longer in stock, sorry!). It’s pretty heavy at 10oz, but was PERFECT for these pants. Just enough body for those wider legs. I used RIT dye in golden yellow to make the fabric this perfect yellow color.

Are you on the wide leg pant trend? I’m so excited about how many of you are working on this hack and can’t wait to see all of the fresh versions of Chi-Town Chinos out in the world!

Chi-Town Chinos: High-Rise Wide-Leg Crop Pant Hack (Part 1)

Chi-Town Chinos: High-Rise Wide-Leg Crop Pant Hack (Part 1)

Last November, on a crisp San Diego morning, I was standing outside in a line of women. My friends and I were early, hoping to be first in line for a warehouse sale, so the employees were still attaching the festive sale decor to the front of the building.

The balloon arch they were constructing was beautiful, but I couldn’t stop looking at the owner’s pants; they were a high-rise, wide-leg crop pant version of my Chi-Town Chinos pattern.

If you sew, then you know ready-to-wear clothing often serves as inspiration…and nothing more, as you tend to feel inspired to make it yourself instead of buying it. The longer I looked at her pants, the more determined I was to recreate those pants.

When I got home, I quick Google search lead me to what I believe are the exact pants she was wearing:

Original inspo via Everlane

I have dyed some white denim to create these golden yellow pants, but for my first try, I used some fabric I’d been saving for a couple of years.

I’ve had this sienna stretch twill from Indiesew since the Chi-Town Chinos were featured in the Indiesew 2016 Fall/Winter Collection (it’s the same fabric you see the samples made out of). I had been saving it for some regular Chi-Town Chinos, so when I saw the Everlane pants, I knew just what to use it for.

This was a pretty simple pattern adjustment, and to make the pattern for these pants, I used both the original pattern and expansion pack no. 2.

This pair should be considered my wearable muslin as there are definite adjustments I need to make in order for this to fit me well. I increased the rise by about .75″ too much, which resulted in some fabric pooling at my lower back, as you can see above. What I need to do to fix this is a sway back adjustment, but it’s also too high in the front, so I think lowering the rise all around will fix it.

My next adjustment will be to make the back pocket smaller. This is the angled back pocket included with the original pattern, but I printed it at 120% the regular size and added 1/2″ to the top. Next time, I will print it at 110% and add 1/2″ to the top.

My last adjustment will be to consider lowering the bottom of the slash pocket opening. I took this pair in slightly at the hips (more info on that below), but in doing so, that moved up the bottom of the pocket opening.

Okay, let’s jump in to how I adapted the original pattern and expansion pack no. 2 to make these pants! My only disclaimer here is that I’m going to tell you how I made these for my body and you’ll want to use this as a general guide for your own, making your own fitting tweaks as necessary.For reference, these are the changes I made to the size 4–depending on what size you’re making, you may need to change the exact amounts, specifically to the leg width, to keep the proportions the same.

First, I want to point out that the crotch curves of the original pattern and both expansion packs are all different. This is a big part of how they give such different fits below the hip. The original pattern is a relaxed straight leg short, expansion pack no. 1 is a fitted knee-length, and expansion pack no. 2 is a semi-relaxed trouser length. (From here on out, I will simply say “XP2” in place of “expansion pack no. 2”.)

In the illustration above, you can see the original pattern (straight leg shorts), then XP2 (semi-fitted trousers) laying on top of it. The red outline is the adjustments I made for the high-rise, wide-leg crop pants.

Front Leg

I traced off everything above the hip, then, using the lengthen/shorten lines, I increased the rise by 2-1/4″ (next version I will do 1.5″–remember I need to decrease the rise slightly for my own body). I used the exp. pack no. 2 front crotch curve and drew a 27.5″ inseam, adding 1.75″ in width to the XP2 inseam at the ankle, and 1.25″ in width to the outseam at the ankle, essentially drawing straight down from the hip to this point. You’ll want to keep the height/placement of the knee notches intact, so just move them over horizontally to place them back on the inseam and outseam.

Note: traditionally, in changing the rise, you would draw a new slanted line to connect the top and bottom of the front slash pocket. However, I wanted to keep the original angle of the front pocket intact, so I just continued the line on from the bottom piece. Don’t forget to match this exact angle when you adapt the rise on the front pocket bag and front pocket facing.

Back Leg

Again, I traced off everything above the hip, increased the rise 2-1/4″ (remember next time I will personally make this 1.5″ instead). I used the XP2 crotch curve again, but shallowed the curve by 3/8″. I drew a 27″ inseam (yes, the inseams are different, pay close attention to the notches being in the same place horizontally as they are on the XP2), adding 1-5/8″ in width to the inseam at the ankle and 1-7/8″ to the outseam, keeping knee notches intact.

With both inseams, you want them to be completely straight from the ankle to above the knee, then gently taper over to the crotch curve point.

Same for the outseams: straight from the ankle to the knee, then gently tapering over to the hip.

Some personal adjustments I made with this fabric (because it has stretch, which the pattern isn’t written for), I narrowed the hips by 3/4″ (1.5″ in the round), increased the dart width by 3/8″ total, and did a 3/8″ thin thigh adjustment to both the front and back. My next pair will be in non-stretch denim, and I don’t think I’ll have to make these same adjustments, with the exception of the larger darts–I make that adjustment to this pattern for myself no matter what.

Other Pieces

Piece R (back pocket interfacing): widen to match the new back pocket size. (Again, I printed mine at 120% and added 1/2″ to the top, but next time will make it slightly smaller at 110-115%)

Pieces J (fly shield), I (topstitching guide), H (fly extension interfacing), E (pocket bag), G (slash pocket front facing), and F (slash pocket back facing): increase the rise to match the pant. Take note of the angle of the front slash pocket angle you decided on for the pant.

Last thing I want you to note is that depending on your shape, you may need to take in or let out the waist. There is a center back adjustment included in the pattern, so if you need to let it out, it’s really easy. If you need to take them in, you can do so at the back darts, like I do, as well as the side seams. If you adjust the waist, you will need to reflect those adjustments in the waistback facing, so you might want to wait to cut that out until you’ve tried yours on and know what adjustment you’re making.

This wasn’t a perfect first go at adapting the pattern, but it was a perfect first go at a wearable muslin. Now that I’ve worn these a ton (and they are SO COMFORTABLE), I feel confident in the adjustments I need to make to make these as perfect as possible. I’ll be reporting back in March with my golden yellow high-rise wide-legged Chi-Town Chinos 2.0!

I hope this inspires you to try your own high-rise wide-legged Chi-Town Chinos! If you make them, be sure to tag me on social media @alinadesignco!

EDIT: I finished up my yellow pair! See them here.

Fulton Sweater Blazer: Collar Tutorial Video

Fulton Sweater Blazer: Collar Tutorial Video

It’s here! The long-awaited (okay, a week and a half) collar tutorial video. While some people learn just fine from written instruction/digital illustration, some of us really need a video to SEE how something works. So, if you’re one of those people (like me), then this video is for you.

This collar is not complicated, and once you sew it, I think you’ll agree that it’s not too difficult. Perhaps fiddly, but once it’s in, you’re going to feel [and your jacket will look] like a million bucks!

I’ll let the video do the rest of the talking. (more…)

How To: Color Block a Pattern

Hi friends! It’s been pretty quiet on the blog here lately, but that’s only because I’ve been sewing and designing like a madwoman! So, I’ve got some good stuff headed your way in 2017.

In the meantime, I guest blogged over at Hart’s Fabric earlier this week. They now carry all of my patterns, and it was a fun way to introduce myself.  (more…)

How to Sew a V-Neck Neckband

how-to-sew-a-v-neck-neckband There are a couple of ways to sew a V-neck neckband; today, I’m going to show you how to use what I call the overlap method. Instead of having a seam at center front, which can be harder to get perfect, you just overlap the binding at center front. It’s a little bit easier to get a neat finish and you don’t have to think about the angles too much (which is great if you’re drafting your own neckline!). (more…)


Sign up for our newsletter to be the first to hear about exciting shop updates, product launches, and opportunities to test our patterns before they go public.

You have successfully subscribed! Add to your contact list so that our emails go straight to your inbox.

Pin It on Pinterest